MAT Freshwater Protein Skimmers

Foam fractionators designed to skim fresh and brackish water in recirculating systems.

Applications: ,

Brand:

Product Information

Key Features

  • Purpose-built for fresh and brackish water — developed for salmon pre-smolt tanks after more than 12 months of venturi injector development, so it foams in water where conventional marine skimmers will not
  • Independently field-trialled by the Norwegian Institute for Water Research (NIVA) in 2020, which measured up to 70% particle removal
  • Fits as an add-on to an existing hatchery RAS filtration train — no redesign of the main loop needed
  • Nine models from PSF-22 to PSF-1300, covering 7 to 690 m³/hr with inlets from 75 mm to 500 mm
  • High-pressure venturi pump feeds tank water into a water cyclone inside the skimmer body, giving fine, dense and constant bubbles
  • Upgraded body with a high-efficiency protein cap collector, higher head pump and redesigned venturi
  • Optional automated foam level controllers for farms running to tight, controlled fresh water conditions
  • Choosing your model: these skimmers are rated on the water flow you pass through them at a 2-minute dwell time — that is the reference condition for every figure in the table below, so match your recirculating flow to a model with that dwell time held. Because skimming also depends on protein loading, confirm your tank biomass and daily feed rate with us as well; MAT does not publish a biomass or feed-load rating per model.

Specifications

ModelFlow at 2-minute dwellDimensions (D × W × H)Inlet / Outlet
PSF-22 (was PS500-FW)7 m³/hr (117 LPM)1,195 × 1,043 × 1,927 mm75 mm / 90 mm
PSF-62 (was PS750-FW)21 m³/hr (350 LPM)1,195 × 1,525 × 2,320 mm110 mm / 140 mm
PSF-220 (was PS1000-FW)39 m³/hr (650 LPM)1,400 × 2,220 × 2,670 mm160 mm / 225 mm
PSF-280 (was PS1250-FW)82 m³/hr (1,367 LPM)1,810 × 2,550 × 3,085 mm200 mm / 250 mm
PSF-360 (was PS1500-FW)135 m³/hr (2,250 LPM)2,100 × 2,810 × 3,630 mm225 mm / 280 mm
PSF-600 (was PS2000-FW)243 m³/hr (4,050 LPM)2,820 × 3,350 × 3,705 mm315 mm / 315 mm
PSF-800 (was PS2350-FW)435 m³/hr (7,250 LPM)2,900 × 4,000 × 4,800 mm400 mm / 400 mm
PS2650-FW (discontinued – contact us)561 m³/hr (9,350 LPM)2,840 × 3,220 × 4,770 mm2 x 355 mm / 2 x 315 mm
PSF-1300 (was PS3000-FW)690 m³/hr (11,500 LPM)3,805 × 4,775 × 4,825 mm500 mm / 500 mm

Frequently Asked Questions

Spare Parts & Consumables

No products were found matching your selection.

Related Products

Have a question or need a custom solution?

Our team is here to help you find the right equipment for your project.