Oxygen Regulator/Flowmeter

Oxygen. A flowmeter scaled for oxygen will not read correctly on air or any other gas.

0 to 15 litres per minute of oxygen, with a safety valve fitted.

Up to 20,000 kPa (200 bar) on the inlet, delivering 170 kPa (1.7 bar) on the outlet.

Aisep oxygen generators and Clearwater ozone generators.

Yes — a mounting bracket is included, so it fixes to a wall or frame beside the generator.

Tell us which generator you are feeding and your required gas flow and we’ll quote it.

A combined oxygen regulator and flowmeter manifold for controlling oxygen from a cylinder to tanks and diffusers.

SKU: as-reg

Categories: Flowmeters, Oxygen & Ozone

Applications: Hatchery, Live Holding & Purging, Live Transport, LSS, RAS, Water & Wastewater Treatment

Product Information

Combined oxygen regulator and flowmeter on one bracket-mounted manifold, ready to plumb in
Calibrated for oxygen — a flowmeter scaled for O2 will not read correctly on air or any other gas
Regulator takes up to 20,000 kPa (200 bar) inlet and delivers 170 kPa (1.7 bar) outlet
Flowmeter reads 0 to 15 L/min of oxygen, with an integral safety valve
1/4″ hose barb connections
Mounting bracket supplied, so it fixes to a wall or frame beside the generator
Built for use with Aisep oxygen generators and Clearwater ozone generators
Sizing: this is a single model, so check your total gas demand sits under 15 L/min and your supply pressure is within the 20,000 kPa regulator inlet rating. If you need more than 15 L/min or a different outlet pressure, contact us.

Specification	Detail
Gas	Oxygen (O2) — the flowmeter is scaled for oxygen and will not read correctly on air
Regulator inlet pressure	Up to 20,000 kPa (200 bar)
Regulator outlet pressure	170 kPa (1.7 bar)
Flowmeter range	0 to 15 L/min of oxygen
Safety valve	Fitted to the flowmeter
Connections	1/4″ hose barb
Mounting	Bracket supplied
Intended use	Feed gas manifold for Aisep oxygen generators and Clearwater ozone generators

What gas is this calibrated for?

What flow range does the flowmeter cover?

What pressures does the regulator handle?

What connections does it use?

What is it normally used with?

Does it come with a way to mount it?

How do I get a price?

No products were found matching your selection.