Facebook-f Linkedin-in Youtube
Facebook-f Linkedin-in Youtube
get a quote

Colorite Aero-Tube Diffuser Grid

The Colorite Aero-Tube Diffuser Grid is a pre-assembled aeration unit with 20 metres of Aero-Tube already fitted to an injection-moulded HDPE body. It delivers 750 LPM (45,000 LPH) through a single 50mm slip connection. Connect the air supply and it is running — the steel frame pictured is not included.

$350.00 ex GST

In stock

SKU: AEROGRID

Categories: ,

Applications: , , ,

Brand:

Colorite Aero-Tube Diffuser Grid

Product Information

Key Features

  • Pre-assembled aeration grid — connect the air supply and it is running
  • Supplied with 20 metres of Colorite Aero-Tube already fitted and clamped
  • Air output of 750 LPM (45,000 LPH) from a single grid
  • Injection-moulded HDPE body with stainless steel clamps for a long service life
  • 50 mm slip connection for straightforward pipework integration
  • Approximately 105 cm long x 125 cm wide x 15 cm high; the steel frame shown in the photo is not included
  • Uses the same tubing as Colorite Aero-Tube and the Aero-Tube Diffuser, at 37 LPM per metre at 1 PSI
  • Sizing — divide your total required air flow by 750 LPM per grid to get the number of grids needed.

Specifications

SpecificationDetail
Model / SKUAEROGRID
Air output750 LPM (45,000 LPH)
Aero-Tube included20 m, pre-fitted and clamped
Tube air flow37 LPM per metre at 1 PSI
Connection50 mm slip
Dimensions (L x W x H)approx. 105 x 125 x 15 cm
Body materialInjection-moulded HDPE
FixingsStainless steel clamps
Shipping weight10 kg
FrameSteel frame pictured is not included
Other sizesOther grid configurations available on request

Downloads

Aero-Tube Technical SpecificationsAero-Tube Literature SheetsColorite Aeration Presentation

Frequently Asked Questions

How many grids do I need?
Divide your total required air flow by 750 LPM per grid — each grid holds 20 m of Aero-Tube running at 37 LPM per metre at 1 PSI.
What bubble size does the grid produce?
Colorite does not publish a bubble diameter for Aero-Tube — if you need a stated sub-0.5 mm microbubble, look at Bubbletech Oxyprax or Airprax instead.
What blower pressure do I need?
The Aero-Tube in the grid runs at 1 PSI, plus enough pressure to overcome the water depth the grid is set at.
How do I clean it?
Lift the grid and flush the tubing through with air or water to clear debris — there are no consumable parts to replace.
What is the difference between Aero-Tube, the Aero-Tube Diffuser and the Diffuser Grid?
Aero-Tube is bulk tubing by the metre, the Aero-Tube Diffuser is a short pre-made weighted length with a barb fitting, and the Diffuser Grid is this pre-assembled HDPE grid holding 20 m of tube on a 50 mm slip connection.
Is the steel frame included?
No — the steel frame shown in the photo is not supplied; the grid is the HDPE body with 20 m of Aero-Tube already fitted.
How does it connect to my air line?
Through a 50 mm slip connection, so it plumbs straight into standard 50 mm pipework.

Spare Parts & Consumables

No products were found matching your selection.

Related Products

Have a question or need a custom solution?

Our team is here to help you find the right equipment for your project.

Get in touch