Fish Transfer Hose

Specialist hose for moving live fish between tanks, graders, counters and transport, available in seven bores from 2.5″ (63 mm) to 12″ (300 mm). The clear wall and white spiral reinforcement let you watch the transfer while the bore stays open under pressure, and food-grade material is supplied as standard. Airtight joiners and hose clamps are supplied to match.

Product Information

Key Features

  • Seven bores from 2.5″ (63 mm) to 12″ (300 mm) — sized to the fish you are moving and your pump throughput
  • Clear wall with white spiral reinforcement, so you can watch fish through the line while the bore stays open under pressure
  • Food-grade material as standard; non-food-grade options available on request
  • Smooth internal surface reduces friction and helps prevent damage to fish during transfer
  • Flexible enough to route through tight plant rooms and around a working deck
  • Airtight joiners and hose clamps supplied to match, for leak-free joins that avoid backflow and turbulence
  • Supplied as rolls up to 8″ and as 10 m cut lengths in 10″ and 12″ — check which unit you are ordering
  • Sizing — match the ID to the barb or fitting on your equipment, then check the working pressure rating covers your pump discharge.

Specifications

SizeNominal bore / ID (mm)OD (mm)Working pressureMaterialSupply
2.5"63Not publishedNot publishedFood-grade clear wall, white spiral reinforcement50 m roll
3"76Not publishedNot publishedFood-grade clear wall, white spiral reinforcement50 m roll
4"100Not publishedNot publishedFood-grade clear wall, white spiral reinforcement30 m roll
6"150Not publishedNot publishedFood-grade clear wall, white spiral reinforcement20 m roll
8"200Not publishedNot publishedFood-grade clear wall, white spiral reinforcement20 m roll
10"254Not publishedNot publishedFood-grade clear wall, white spiral reinforcement10 m cut length
12"300Not publishedNot publishedFood-grade clear wall, white spiral reinforcement10 m cut length

Frequently Asked Questions

How do I choose the right size?
Size the bore to the largest fish you will move and to your fish pump’s throughput and outlet, then match that ID to the pump, grader and counter connections — send us your species, grade and pump model and we will confirm.
Is it sold per metre or per roll?
By the roll up to 8in — 50 m in 2.5in and 3in, 30 m in 4in, 20 m in 6in and 8in — and as 10 m cut lengths in 10in and 12in.
Is it food-grade?
Yes — food-grade material is supplied as standard, and non-food-grade options are available on request where compliance is not required.
Is it suitable for ozone or pure oxygen?
No. This is a fish and water transfer hose with no ozone or oxygen service rating — use Tygon Ozone Tubing for ozone and Mako Red Multipurpose Oxygen Hose for oxygen.
Do you supply the fittings as well?
Yes — airtight joiners and hose clamps are supplied to suit, which keeps pressure steady and prevents backflow or turbulence that would stress the fish.
Will it survive outdoors in the sun?
It is built for repeated use in demanding aquaculture environments, but no UV or temperature rating is published — store coils out of direct sun between transfers.
What is the working pressure rating?
A working pressure is not published for this hose. Contact us with your pump discharge pressure and run length before specifying it.

Spare Parts & Consumables

No products were found matching your selection.

Have a question or need a custom solution?

Our team is here to help you find the right equipment for your project.